Boost Your Productivity!Translate documents (Ms-Word, Ms-Excel, ...) faster and better thanks to artificial intelligence!
https://pro.wordscope.com
https://blog. wordscope .com
Automatic full-load stop for the control rack

Vertaling van "Automatic full-load stop for the control rack " (Engels → Nederlands) :

TERMINOLOGIE
automatic full-load stop for the control rack

automatische vollastaanslag van de regelstang | vollast
IN-CONTEXT TRANSLATIONS
When tested with the energy source stopped, the supply line blocked off, a reservoir of 0,5 litre capacity connected to the pneumatic control line and the system at cut-in and cut-out pressures, the pressure at full application of the braking control device shall be between 650 and 850 kPa at the coupling heads of the supply line and the pneumatic control line, irrespective of the load condition of the vehicle.

Tijdens tests met uitgeschakelde energiebron, afgesloten toevoerleiding, een reservoir van 0,5 liter aangesloten op de pneumatische bedieningsleiding en de systeemdruk op inschakel- en op uitschakelniveau, moet bij volledige indrukking van het bedieningsorgaan de druk aan de koppelingskop van de toevoerleiding en van de pneumatische bedieningsleiding tussen 650 en 850 kPa liggen, ongeacht de beladingstoestand van het voertuig.


However, for partial or complete movements in which there is no risk of the load or the machinery colliding, the said devices may be replaced by control devices authorising automatic stops at pre-selected positions without the operator holding a hold-to-run control device.

Voor gedeeltelijk of geheel uitgevoerde bewegingen, waarbij geen gevaar bestaat voor het tegen elkaar botsen van last en machine, mogen bovengenoemde organen echter worden vervangen door bedieningsorganen die bewegingen met automatische stilstand op van tevoren ingestelde posities mogelijk maken, zonder dat de bediener de bedieningsorganen ingeschakeld houdt.


However, for partial or complete movements in which there is no risk of the load or the machinery colliding, the said devices may be replaced by control devices authorising automatic stops at pre-selected positions without the operator holding a hold-to-run control device.

Voor gedeeltelijk of geheel uitgevoerde bewegingen, waarbij geen gevaar bestaat voor het tegen elkaar botsen van last en machine, mogen bovengenoemde organen echter worden vervangen door bedieningsorganen die bewegingen met automatische stilstand op van tevoren ingestelde posities mogelijk maken, zonder dat de bediener de bedieningsorganen ingeschakeld houdt.


3.1.2.1. When tested with the energy source stopped, the supply line blocked off and a reservoir of 0,5 litre capacity connected to the control line, and the system at cut-in and cut-out pressures, the pressure at full application of the service braking system control shall be between 6,5 and 8,5 bar at the coupling heads of the supply line and the control line, irrespective of the load condition of the vehicle.

3.1.2.1. die worden beproefd met uitgeschakelde energiebron, met afgesloten voedingsleiding, met een reservoir van 0,5 l aangesloten op de bedieningsleiding en met de systeemdruk op inschakel- en op uitschakelniveau, moet de druk bij volledig intrappen van het bedieningsorgaan aan de koppelingskop van de voedingsleiding en van de bedieningsleiding tussen 6,5 en 8,5 bar liggen, ongeacht de beladingstoestand van het voertuig.


For more results, go to https://pro.wordscope.com to translate your documents with Wordscope Pro!
Hoever, for partial or complete movements in which there is no risk of the load or the machinery colliding, the said devices may be replaced by controls authorizing automatic stops at preselected levels without holding a hold-to-run control device

Voor bewegingen van het gehele werktuig of een deel daarvan waarbij geen gevaar bestaat dat de last of de machine ergens tegenaan stoot, kunnen bovengenoemde organen worden vervangen door bedieningsorganen die bewegingen toelaten met automatische stilstand op van tevoren ingestelde niveaus, zonder dat de bediener de bedieningsorganen ingeschakeld houdt.


3.1.2.In the case of a vehicle authorized to draw trailers of category O3 or O4 fitted with compressed air brakes, when tested with the energy source stopped, the supply line blocked off and a reservoir of 0,5-litre capacity connected to the control line, the pressure at full application of the braking control must be between 6,5 and 8 bar at the coupling head of the supply line and between 6 and 7,5 bar at the coupling head of the control line, irrespective of the load condition of the vehicle.

3.1.2.Indien een voertuig waarmede een aanhangwagen van categorie O3 of O4 uitgerust met luchtdrukremmen mag worden voortbewogen, wordt beproefd met uitgeschakelde energiebron, met afgesloten voedingsleiding en met een reservoir van 0,5 l aangesloten op de bedieningsleiding, dan moet de druk bij volledig intrappen van het rempedaal aan de koppelingskop van de voedingsleiding tussen 6,5 en 8 bar bedragen, en aan de koppelingskop van de bedieningsleiding tussen 6 en 7,5 bar, ongeacht de beladingstoestand van het voertuig..




Anderen hebben gezocht naar : Automatic full-load stop for the control rack     


datacenter (1): www.wordscope.nl (v4.0.br)

'Automatic full-load stop for the control rack' ->

Date index: 2023-12-16
w