Boost Your Productivity!Translate documents (Ms-Word, Ms-Excel, ...) faster and better thanks to artificial intelligence!
https://pro.wordscope.com
https://blog. wordscope .com
Adjust rolling slide
Alter thread rolling machine die blocks
Angle of roll
Change thread rolling machine die blocks
Crushed by rolling stock
Hit by rolling stock
Locate straightening rolls
Out-to-out angle of rolling
Out-to-out roll angle
Position straightening rolls
Post rolls of a straightening press
Roll angle
Roll angle indicator
Rolling stock drafter
Rolling stock draughtsperson
Rolling stock engineering drafter
Rolling stock engineering draftsperson
Stand straightening rolls
Vary thread rolling machine die blocks

Vertaling van "angle roll " (Engels → Nederlands) :

TERMINOLOGIE


out-to-out angle of rolling | out-to-out roll angle

amplitude van de slingerbeweging | slinger-amplitude




rolling stock drafter | rolling stock engineering draftsperson | rolling stock draughtsperson | rolling stock engineering drafter

technisch tekenaar rollend materieel


post rolls of a straightening press | stand straightening rolls | locate straightening rolls | position straightening rolls

richtwalsen plaatsen


alter thread rolling machine die blocks | change thread rolling machine die blocks | adjust rolling slide | vary thread rolling machine die blocks

rolbaan afstellen


A rare genetic neurodegenerative disorder with characteristics of severe, persistent hypotonia (presenting at birth or in early infancy), severe global developmental delay (with poor or absent speech, difficulty or inability to roll, sit or walk), pr

hypotonie, spraakstoornis, ernstige cognitieve achterstand-syndroom




Crushed by rolling stock

verpletterd door rollend materiaal


Occupant of railway train or railway vehicle injured in collision with or hit by rolling stock

inzittende van trein of spoorwegvoertuig gewond bij botsing met of geraakt door rollend materieel
IN-CONTEXT TRANSLATIONS
At all angles of horizontal rotation up to 90° each side of the longitudinal centre line of the device, there shall be an angle of free axial roll each side of the vertical centre line of 25° for three- and four-wheel vehicles or 40° for two-wheel vehicles.

bij alle horizontale verdraaiingshoeken tot 90° rond de lengteas van de koppelinrichting dient de vrije axiale verdraaiingshoek aan beide zijden van de verticale as 25° te bedragen voor voertuigen op drie en op vier wielen en 40° voor voertuigen op twee wielen.


Flat-rolled products, hot-rolled bars and rods, in irregularly wound coils; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel

Gewalste platte producten en walsdraad; staven en profielen van ander gelegeerd staal; holle staven voor boringen, van gelegeerd of niet-gelegeerd staal


Flat-rolled products, bars and rods, angles, shapes and sections of iron or non-alloy steel

Gewalste platte producten, walsdraad, staven en profielen, van ijzer of van niet-gelegeerd staal


Flat-rolled products, bars and rods, angles, shapes and sections of stainless steel

Gewalste platte producten, walsdraad, staven en profielen, van roestvrij staal


For more results, go to https://pro.wordscope.com to translate your documents with Wordscope Pro!
7225 to 7228 | Flat-rolled products, hot-rolled bars and rods, in irregularly wound coils; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel | Manufacture from ingots or other primary forms or semi-finished products of heading 7206, 7207, 7218 or 7224 | |

7225 t/m 7228 | Gewalste platte producten en walsdraad, staven en profielen, van ander gelegeerd staal; holle staven voor boringen, van gelegeerd of niet-gelegeerd staal | Vervaardiging uit ingots of andere primaire vormen of halffabricaten, bedoeld bij post 7206, 7207, 7218 of 7224. | |


For platforms on upgraded lines in Great Britain where trains complying with the High Speed Rolling Stock TSI are intended to stop in normal commercial operation, the height at the edge of the platform shall be 915 mm (within a tolerance of + 0, - 50 mm) measured at right angles to the plane of the rails of the track adjacent to the platform.

De hoogte aan de rand van perrons van aangepaste lijnen in Groot-Brittannië waar treinen die voldoen aan de eisen van de TSI voor hogesnelheidsmaterieel onder omstandigheden van normale exploitatie worden geacht te stoppen moet haaks op de spoorstaafspiegel van het spoor naast dat perron gemeten 915 mm bedragen (tolerantie + 0, - 50 mm).


ex 7224, 7225 to 7228 | Semi-finished products, flat-rolled products, hot-rolled bars and rods, in irregularly wound coils; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel | Manufacture from ingots or other primary forms of headings 7206, 7218 or 7224 | |

ex 7224, 7225 tot en met 7228 | Halffabricaten, gewalste platte producten, walsdraad, staven en profielen, van ander gelegeerd staal; staven en profielen van ander gelegeerd staal; holle staven voor boringen, van gelegeerd of niet-gelegeerd staal | Vervaardiging uit staal, in ingots of in andere primaire vormen, van post 7206, 7218 of 7224 | |


The ship should be considered as surviving if a stationary state is reached for the successive test runs as required in 3.3, provided that angles of roll of more than 30 against the vertical axis, occurring more frequently than in 20% of the rolling cycles or steady heel greater than 20 should be taken as capsizing events even if a stationary state is reached.

Het schip wordt geacht te overleven indien een stationaire toestand wordt bereikt bij de opeenvolgende reeksen van proeven zoals voorgeschreven in punt 3.3, met dien verstande dat rolhoeken van meer dan 30 ten opzichte van de verticale as, die zich vaker voordoen dan in 20% van de rolcycli, of een negatieve stabiliteit van meer dan 20 als kapseizen moeten worden beschouwd, ook indien een stationaire toestand wordt bereikt.


Continuous cast products of solid section, whether or not subjected to primary hot-rolling; and other products of solid section, which have not been further worked than subjected to primary hot-rolling or roughly shaped by forging, including blanks for angles, shapes or sections.

massieve producten verkregen door continu-gieten, ook indien warm voorgewalst; en andere massieve producten enkel warm voorgewalst of ruw voorgesmeed, profielen in voorwerpsvorm daaronder begrepen.


5.1.2. At all angles of horizontal rotation up to 90° each side of the longitudinal centre line of the device there must be an angle of free axial roll each side of the vertical centre line of 25° for three-wheel vehicles or 40° for two-wheel vehicles.

5.1.2. Bij alle horizontale verdraaiingshoeken tot 90° rond de lengteas van de koppelinrichting dient de vrije axiale verdraaiingshoek aan beide zijden van de verticale as 25° te bedragen voor voertuigen op drie wielen en 40° voor voertuigen op twee wielen.




datacenter (1): www.wordscope.nl (v4.0.br)

'angle roll' ->

Date index: 2023-12-12
w