Boost Your Productivity!Translate documents (Ms-Word, Ms-Excel, ...) faster and better thanks to artificial intelligence!
https://pro.wordscope.com
https://blog. wordscope .com
Contact resistance test under dynamic conditions
Dynamic test under load
R.u.L.test
Refractoriness-under-load test

Vertaling van "dynamic test under load " (Engels → Nederlands) :

TERMINOLOGIE


R.u.L.test | refractoriness-under-load test

beproeving van de verwerking onder druk


contact resistance test under dynamic conditions

contactweerstandsproef in dynamische toestand
IN-CONTEXT TRANSLATIONS
In particular, the Commission should be empowered to establish the specific procedures, tests and requirements for the type-approval of motor vehicles, components and separate technical units; to define more precisely the characteristics a tyre must fulfil to be defined as ‘special use tyre’, ‘off-road professional tyre’, ‘reinforced tyre’, ‘extra load tyre’, ‘snow tyre’, ‘T-type temporary-use spare tyre’ or ‘traction tyre’; to set out specific safety requirements for vehicles intended for the transport of dangerous goods by road wi ...[+++]

In het bijzonder moet aan de Commissie de bevoegdheid worden verleend om de specifieke procedures, tests en voorschriften voor de typegoedkeuring van motorvoertuigen, onderdelen en technische eenheden vast te stellen; om nauwkeuriger te bepalen welke eigenschappen een afzonderlijke band moet bezitten om als „band voor speciaal gebruik”, „professionele terreinband”, „versterkte band”, „band met een hoger draagvermogen”, „winterband”, „reserveband voor tijdelijk gebruik van het T-type” of „tractieband” te worden gedefinieerd; om specifieke veiligheidsvoor ...[+++]


Dynamic test’ means the test during which lifting machinery is operated in all its possible configurations at the maximum working load multiplied by the appropriate dynamic test coefficient with account being taken of the dynamic behaviour of the lifting machinery in order to check that it functions properly.

Dynamische beproeving”: proef waarbij de hijs- of hefmachine in alle mogelijke configuraties in werking wordt gesteld met de maximale werklast vermenigvuldigd met de juiste dynamische-beproevingscoëfficiënt, waarbij rekening wordt gehouden met het dynamische gedrag van de hijs- of hefmachine teneinde de goede werking ervan te verifiëren.


Machinery must be designed and constructed in such a way as to undergo, without failure, the dynamic tests carried out using the maximum working load multiplied by the dynamic test coefficient.

De machine moet zodanig zijn ontworpen en gebouwd dat zij zonder defect de dynamische beproeving, die wordt verricht met de maximale werklast vermenigvuldigd met de dynamische-beproevingscoëfficiënt, kan doorstaan.


‘Test coefficient’ means the arithmetic ratio between the load used to carry out the static or dynamic tests on lifting machinery or a lifting accessory and the maximum working load marked on the lifting machinery or lifting accessory.

„Beproevingscoëfficiënt”: rekenkundige verhouding tussen de last die voor de statische of dynamische beproeving van een hijs- of hefmachine of hijs- of hefgereedschap wordt gebruikt, en de maximale werklast die respectievelijk op de machine of het gereedschap is aangegeven.


For more results, go to https://pro.wordscope.com to translate your documents with Wordscope Pro!
This test is carried out at an impact speed of 40 km/h.The maximum dynamic knee bending angle shall not exceed 15.0°, the maximum dynamic knee shearing displacement shall not exceed 6.0 mm, and the acceleration measured at the upper end of the tibia shall not exceed 150 g. This test may be substituted by the Upper Legform to Frontal Protection System “Bumper” test under specified conditions.

Deze test wordt uitgevoerd met een botssnelheid van 40 km/h. De maximale dynamische kniebuigingshoek mag niet groter zijn dan 15,0°, de maximale dynamische knieafschuiving niet groter dan 6,0 mm en de aan de bovenkant van het scheenbeen gemeten versnelling niet hoger dan 150 g. Deze test mag onder bepaalde omstandigheden door de test Bovenbeen-botslichaam tegen bumper als beschermingsinrichting aan de voorzijde worden vervangen.


Idle State: For purposes of testing and qualifying computers under this specification, this is the state in which the operating system and other software have completed loading, the machine is not asleep, and activity is limited to those basic applications that the system starts by default.

Onbelaste stand: Voor het testen en kwalificeren van computers overeenkomstig deze specificatie is dit de stand waarin het besturingssysteem en de andere software volledig is geladen, de computer niet in de slaapstand staat, en de activiteit beperkt is tot de basistoepassingen die het systeem bij verstek start.


'Dynamic test': the test during which the machinery or lifting accessory is operated in all its possible configurations at nominal load multiplied by the appropriate dynamic test coefficient with account being taken of the dynamic behaviour of the machinery in order to check that the machinery or the lifting accessory is functioning properly.

"Dynamische beproeving": proef waarbij de machine of het hijs- of hefgereedschap in alle mogelijke configuraties in werking wordt gesteld met de nominale belasting , vermenigvuldigd met de juiste dynamische-beproevingscoëfficiënt, waarbij rekening wordt gehouden met het dynamische gedrag van de machine teneinde de goede werking van de machine of het gereedschap te verifiëren.


"Test coefficient": means the arithmetic ratio between the load used to carry out the static or dynamic tests on a piece of lifting machinery or equipment or an accessory and the nominal load marked on the piece of machinery or equipment or accessory.

"Beproevingscoëfficiënt": rekenkundige verhouding tussen de last die voor de statische of dynamische beproeving van een hijs- of hefmachine, -uitrusting of -gereedschap wordt gebruikt en de nominale belasting die respectievelijk op de machine, de uitrusting of het gereedschap is aangegeven.


Machinery must be designed and constructed to undergo, without failure, the dynamic tests carried out using the nominal load multiplied by the dynamic test coefficient.

De machine moet zodanig zijn ontworpen en gebouwd dat zij zonder defect de dynamische proeven, die worden verricht met de nominale belasting vermenigvuldigd met de dynamische beproevingscoëfficiënt, kan doorstaan.


4.1.1. The test provided for in point 4.2 shall not be required in the case of any exterior mirror of which no part is less than 2 m from the ground, regardless of the adjustment position, when the vehicle is under a load corresponding to its maximum technically permissible mass.

4.1.1. De in punt 4.2 beschreven proef is niet vereist voor buitenspiegels waarvan, ongeacht de gekozen stand, geen enkel deel zich op minder dan 2 m van de grond bevindt indien het voertuig tot zijn maximum toelaatbare massa is belast.




Anderen hebben gezocht naar : r u l test     dynamic test under load     


datacenter (1): www.wordscope.nl (v4.0.br)

'dynamic test under load' ->

Date index: 2024-04-09
w