Boost Your Productivity!Translate documents (Ms-Word, Ms-Excel, ...) faster and better thanks to artificial intelligence!
https://pro.wordscope.com
https://blog. wordscope .com
Densità del flusso di potenza
Densità del flusso termico
Densità di flusso termico
Densità di potenza
Flusso termico specifico
Misuratore di densità del flusso termico
Q

Vertaling van "Densità di flusso termico " (Italiaans → Engels) :

TERMINOLOGIE
densità di flusso termico | flusso termico specifico [ q ]

density of heat flow rate [ q ]




densità del flusso termico

density of heat flow rate | heat flow density


misuratore di densità del flusso termico

heat flow density probe


densità del flusso di potenza | densità di potenza

power flux density
IN-CONTEXT TRANSLATIONS
I materiali costitutivi e gli altri componenti destinati alla protezione dal calore radiante e convettivo devono avere un coefficiente adeguato di trasmissione del flusso termico incidente e un grado di incombustibilità sufficientemente elevato, per evitare ogni rischio di combustione spontanea nelle condizioni prevedibili di impiego.

Constituent materials and other components intended for protection against radiant and convective heat must possess an appropriate coefficient of transmission of incident heat flux and be sufficiently incombustible to preclude any risk of spontaneous ignition under the foreseeable conditions of use.


I materiali costitutivi e gli altri componenti dei DPI destinati a proteggere dal freddo devono possedere coefficienti di trasmissione del flusso termico incidente tanto bassi quanto lo richiedono le condizioni prevedibili di impiego.

Constituent materials and other components suitable for protection against cold must possess a coefficient of transmission of incident thermal flux as low as required under the foreseeable conditions of use.


I materiali costitutivi e gli altri componenti destinati alla protezione dal calore radiante e convettivo devono avere un coefficiente adeguato di trasmissione del flusso termico incidente e un grado di incombustibilità adeguatamente elevato, per evitare ogni rischio di combustione spontanea nelle condizioni prevedibili di impiego.

Constituent materials and other components intended for protection against radiant and convective heat must possess an appropriate coefficient of transmission of incident heat flux and be adequately incombustible to preclude any risk of spontaneous ignition under the foreseeable conditions of use.


(f) "valore d'orientamento" e "valore d'azione": parametri direttamente misurabili — dipendenti dalla frequenza — il cui valore quantitativo è stabilito in termini di forza del campo elettrico (E), forza del campo magnetico (H), densità del flusso magnetico (B) e densità di potenza (S), e in rapporto ai quali devono essere adottate una o più misure specificate nella presente direttiva.

((f) ‘orientation value’ and ‘action value’: directly measurable — frequency-dependent — parameters, the magnitude of which is established in terms of electric field strength (E), magnetic field strength (H), magnetic flux density (B) and power density (S), and at which one or more of the measures specified in this Directive must be taken.


For more results, go to https://pro.wordscope.com to translate your documents with Wordscope Pro!
e)«calore misurabile», flusso termico netto trasportato lungo tubature o condotte individuabili utilizzando un mezzo di scambio termico quale vapore, aria calda, acqua, olio, metalli liquidi e sali, per i quali un contatore di calore è stato o può essere installato.

(e)‘measurable heat’ means a net heat flow transported through identifiable pipelines or ducts using a heat transfer medium, such as, in particular, steam, hot air, water, oil, liquid metals and salts, for which a heat meter is or could be installed.


«calore misurabile», flusso termico netto trasportato lungo tubature o condotte individuabili utilizzando un mezzo di scambio termico quale vapore, aria calda, acqua, olio, metalli liquidi e sali, per i quali un contatore di calore è stato o può essere installato.

measurable heat’ means a net heat flow transported through identifiable pipelines or ducts using a heat transfer medium, such as, in particular, steam, hot air, water, oil, liquid metals and salts, for which a heat meter is or could be installed.


i)comportante un flusso termico continuo ad elevata temperatura per un breve periodo (almeno 135 oC per un periodo di durata appropriata) tale da eliminare microrganismi o spore vitali in grado di svilupparsi nel prodotto trattato quando esso sia mantenuto in un recipiente chiuso asettico a temperatura ambiente,; e

(i)involving a continuous flow of heat at a high temperature for a short time (not less than 135 oC in combination with a suitable holding time) such that there are no viable micro-organisms or spores capable of growing in the treated product when kept in an aseptic closed container at ambient temperature; and


comportante un flusso termico continuo ad elevata temperatura per un breve periodo (almeno 135 oC per un periodo di durata appropriata) tale da eliminare microrganismi o spore vitali in grado di svilupparsi nel prodotto trattato quando esso sia mantenuto in un recipiente chiuso asettico a temperatura ambiente,; e

involving a continuous flow of heat at a high temperature for a short time (not less than 135 oC in combination with a suitable holding time) such that there are no viable micro-organisms or spores capable of growing in the treated product when kept in an aseptic closed container at ambient temperature; and


La densità di popolamento accettabile per una determinata specie può variare in funzione del flusso e della corrente d’acqua, della sua qualità e della dimensione, dell’età, dello stato di salute e dei metodi di nutrimento dei pesci.

Acceptable stocking density for a given species will vary depending on water flow and current, water quality, fish size, age, health and feeding method.


Se si utilizza un sistema di diluizione del flusso parziale, il rapporto di diluizione deve essere regolato in modo da mantenere la temperatura dell'emissione dei gas di scarico diluiti pari o inferiore a 325 K (52 oC) immediatamente prima dei filtri del particolato per la modalità di funzionamento che presenta il flusso termico massimo che è funzione della portata e/o della temperatura dei gas di scarico grezzi.

When using a partial-flow-dilution system, the dilution ratio must be set so as to keep the temperature of the diluted exhaust at or below 325 K (52 oC) immediately before the particulate filters at the mode with the maximum heat flow as determined from exhaust flow and/or temperature; '




datacenter (19): www.wordscope.nl (v4.0.br)

'Densità di flusso termico' ->

Date index: 2022-06-05
w